Perio
d
ic maintenance an
d
a
d
justment
7-35
7
a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.
EAU24361
Front wheel
EAU56222
To remove the front wheel
WARNING
EWA10822
To avoi
d
injury, securely support the
vehicle so there is no
d
an
g
er of it
fallin
g
over.
1. Disconnect the speedometer ca-
ble from the speedometer gear
unit.
2. Loosen the front wheel axle pinch
bolt, then the wheel axle.
3. Lift the front wheel off the ground
according to the procedure in the
previous section “Supporting the
motorcycle”.
4. Pull the wheel axle out, and then
remove the wheel.
NOTICE:
Do
not apply the
b
rake after the
wheel an
d
b
rake
d
isc have
b
een
remove
d
, otherwise the
b
rake
pa
d
s will
b
e force
d
shut.
[ECA11073]
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
jections mesh with the slots.
2. Lift the wheel up between the fork
legs.
1. Speedometer cable
1. Wheel axle
2. Front wheel axle pinch bolt
U1BF27E0.book Page 35 Tuesday, May 17, 2016 8:35 AM
