Yamaha XV1600A1999, Service Manual

Page: 127 / 460

3-61
INSTRUMENT FUNCTIONS
CHK
ADJ
NOTE:
To reset the trip meter “0”, push the set button
until it displays “TRIP A” or “TRIP B”, then push
mode button and hold it down for at least one se-
cond.
This motorcycle does not have a tachometer.
However, it is equipped with an engine revolu-
tion limiter, which prevents the engine revolu-
tion from exceeding approximately 4,400 r / min.
Setting the clock
This clock always shows the time regardless of
the main switch position.
1. Turn the main switch to “ON”.
2. Press both left and right buttons simulta-
neously until both hours and minutes flash.
1
3. Push the left button and the hour display will
flash. 2
4. Push the right button to change the hours. 3
5. Push the left button and the minute display
will flash. 4
6. Push the right button to change the minutes.
5
7. Push the left button and both hours and min-
utes will flash. 6
8. Push the right button for two seconds to set
the clock. 7