![Yamaha XV1600A1999 Service Manual Download Page 126](http://html.mh-extra.com/html/yamaha/xv1600a1999/xv1600a1999_service-manual_946236126.webp)
3-60
INSTRUMENT FUNCTIONS
CHK
ADJ
INSTRUMENT FUNCTIONS
INDICATOR LIGHTS
1 Fuel indicator light “
”
2 High beam indicator light “
”
3 Turn indicator light “
”
4 Neutral indicator light “ N ”
5 Engine trouble indicator light “
”
Neutral indicator light “ N ”
This indicator comes on when the transmis-
sion is in neutral.
High beam indicator light “
”
This indicator comes on when the headlight
high beam is used.
Turn indicator light “
”
This indicator flashes when the turn switch is
moved to the left or right.
Fuel level indicator light “
”
When the fuel level drops below approxi-
mately 3.5 L this light will come on. When this
light comes on, turn the fuel cock to “RES”.
Then, switch the fuel cock to “RES”. Then, fill
the tank at the first opportunity.
Engine trouble indicator light “
”
This indicator light will come on or flash if
trouble occurs in a monitoring circuit. In such
a case, take the motorcycle to a Yamaha
dealer to have the self-diagnostic systems
checked.
COMBINATION METER
1 Combination meter
2 Clock
3 Odometer / trip meter
4 Mode button
5 Set button
This combination meter is equipped with an
odometer and a twin trip meter. Pushing the
mode button will change the display from one to
the other as follows.
“ODO”
“TRIP A”
“TRIP B”
“ODO”
When set to “ODO”, it indicates the motorcycle’s
total mileage. When set to “TRIP A” or “TRIP B”,
it indicates the motorcycle’s mileage since the
trip meter was last reset. Use the trip meter to
estimate how far you can ride on a tank of fuel.
This information will enable you to plan fuel
stops in the future.
Summary of Contents for XV1600A1999
