Operation
37
cord to clothing that could tear loose. Do not route the
cord where it could become entangled, preventing it
from functioning.
Avoid accidentally pulling the cord during normal op-
eration. Loss of engine power means the loss of most
steering control. Also, without engine power, the boat
could slow rapidly. This could cause people and ob-
jects in the boat to be thrown forward.
1.
Place the control lever in “ ” (neutral).
TIP:
The start-in-gear protection device prevents the engine from
starting except when in neutral.
2.
Attach the engine shut-off cord to a secure place on
your clothing, or your arm or leg. Then install the clip on
the other end of the cord into the engine shut-off switch.
3.
Turn the main switch to “
” (on) to make sure that the
digital electronic control-active indicator comes on. The
engine cannot be started when the digital electronic
control-alert indicator comes on.
4.
Turn the main switch to “
” (start), and hold it for a
maximum of 5 seconds.
NOTICE:
Never turn the main
switch to “
” (start) while the engine is running.
Do not keep the starter motor turning for more than
5 seconds. If the starter motor is turned continuous-
ly for more than 5 seconds, the battery will be quick-
ly discharged, thus making it impossible to start the
engine. The starter can also be damaged. If the en-
gine will not start after 5 seconds of cranking, return
the main switch to “
” (on), wait 10 seconds, then
crank the engine again.
[ECM00193]
When starting the engine using the Start/Stop button,
press the button to start the engine. The indicator for the
starting engine will come on.
When starting the engine using the Start/Stop button on
the All Start/Stop switch panel, press the button to start
all of the engines.
1. Engine shut-off cord (lanyard)
1. Engine shut-off switch
2. Clip
3. Engine shut-off cord (lanyard)
ZMU05829
N
1
1
2
3
1. Main switch
1. Main switch
ON
OFF
START
1
ON
OFF
START
1
ZMU07148
U6GR30E0.book Page 37 Thursday, April 12, 2018 9:28 AM
©
2019 Yamaha Motor Corporation, U.S.A.