manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXP, Owner'S Manual, Page: 79 / 167

Share
Download
Yamaha WOLVERINE YFM350FXP Owner'S Manual Download Page 79

7-15

Exhaust system

The exhaust system on the machine is very
hot during and following operation. To prevent
burns, avoid touching the exhaust system.
Park the machine in a place where pedestri-
ans or children are not likely to touch it.

WARNING

POTENTIAL HAZARD
Hot exhaust system.
WHAT CAN HAPPEN
Dry grass or brush or other combustible
material accumulated around the en-
gine area could catch fire.
Someone touching the exhaust system
during or after operation could be burned.
HOW TO AVOID THE HAZARD
Do not operate, idle, or park the ATV in
dry grass or other dry ground cover.
Keep the engine area free of dry grass,
brush, or other combustible material.
Do not touch the hot exhaust system.
Do not park the ATV in a place where
others might be likely to touch it.

U4KB1C.book  Page 15  Wednesday, October 23, 2002  2:54 PM

Summary of Contents for WOLVERINE YFM350FXP








































































































































































Reviews:

No comments