manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXP, Owner'S Manual, Page: 147 / 167

Share
Download
Yamaha WOLVERINE YFM350FXP Owner'S Manual Download Page 147

8-42

EBU00440

Troubleshooting chart

1. Fuel

Check if there is fuel
in the fuel tank.

There is fuel.

Turn the fuel
cock to “OFF”.

No fuel.

Fuel cock
clogged.

Clean fuel
cock.

Some fuel.

Turn the fuel
cock to “RES”.

Restart engine.

No fuel.

Supply fuel.

2. Compression

Use the electric starter
to see if there is
compression.

There is compression.

Compression normal.

No compression.

Ask a Yamaha dealer to
inspect.

3. Ignition

Remove the plug and
check the electrodes.

Wet

Wipe clean with dry cloth.

Dry

Attach plug cap and
ground to chassis.

Use the
electric starter.

Spark good.

Ignition system
normal.

Spark weak.

Adjust plug gap
or replace plug.

No spark.

Ask a Yamaha dealer to
inspect.

4. Battery

Use the electric
starter.

Engine turns over
quickly.

Battery good.

Engine turns over
slowly.

Check fluid, recharge,
check connections.

Check fuel
flow.

Turn the fuel
cock to “ON”.

Remove the
fuel hose. 

U4KB1C.book  Page 42  Wednesday, October 23, 2002  2:54 PM

Summary of Contents for WOLVERINE YFM350FXP








































































































































































Reviews:

No comments