manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXP, Owner'S Manual, Page: 57 / 167

Share
Download
Yamaha WOLVERINE YFM350FXP Owner'S Manual Download Page 57

6-6

EBU00205

To start out and accelerate:

1. Release the throttle lever.

CAUTION:

Always close the throttle while shifting
gears. Otherwise, damage to the engine
and drive train may result.

2. Shift into first gear and release the shift

pedal.

3. Open the throttle gradually.
4. Once the machine has attained adequate

speed, release the throttle lever.

5. Shift into second gear and release the

shift pedal.

6. Open the throttle gradually.
7. Follow the same procedure when shifting

to the next higher gear.

WARNING

POTENTIAL HAZARD

Opening the throttle before releasing
the shift pedal.

WHAT CAN HAPPEN

The machine could wheelie. This would
increase the chance of an accident, in-
cluding overturn.

HOW TO AVOID THE HAZARD

Release the shift pedal before opening
the throttle. Open the throttle gradually.

U4KB1C.book  Page 6  Wednesday, October 23, 2002  2:54 PM

Summary of Contents for WOLVERINE YFM350FXP








































































































































































Reviews:

No comments