manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXP, Owner'S Manual, Page: 47 / 167

Share
Download
Yamaha WOLVERINE YFM350FXP Owner'S Manual Download Page 47

5-8

EBU00493

Final gear oil

Make sure the final gear oil is at the specified
level. Add oil as necessary. (See pages 8-9 ~
8-10 for details.)

If desired, an SAE 80W90 hypoid gear oil may
be used for all conditions.

NOTE:

GL-4 is a quality and additive rating, GL-5 or
GL-6 rated hypoid gear oils may also be used.

EBU00494

Differential gear oil

Make sure the differential gear oil is at the
specified level. Add oil as necessary. (See
pages 8-11 ~ 8-12 for details.)

EBU00151

Throttle lever

Check to see that the throttle lever operates
correctly. It must open smoothly and spring
back to idle position when released. Repair as
necessary for proper operation.

EBU00152

Fittings and Fasteners

Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a Yamaha dealer or refer to the Service
Manual for correct tightening torque.

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

Recommended oil:

SAE 80 or SAE 80W-90
API GL-5 Hypoid gear oil for L.S.D.
(Limited Slip Differential)

U4KB1C.book  Page 8  Wednesday, October 23, 2002  2:54 PM

Summary of Contents for WOLVERINE YFM350FXP








































































































































































Reviews:

No comments