manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXP, Owner'S Manual, Page: 100 / 167

Share
Download
Yamaha WOLVERINE YFM350FXP Owner'S Manual Download Page 100

7-36

RIDING OVER ROUGH TERRAIN

Riding over rough terrain should be done with
caution. Look out for obstacles which could
cause damage to the ATV or could lead to an
upset or accident. Be sure to keep your feet
firmly mounted on the footboards at all times.
Avoid jumping the ATV as loss of control and
damage to the ATV may result.

WARNING

POTENTIAL HAZARD

Improperly operating over obstacles.

WHAT CAN HAPPEN

Could cause loss of control or a colli-
sion. Could cause the ATV to overturn.

HOW TO AVOID THE HAZARD

Before operating in a new area, check
for obstacles.
Never attempt to ride over large obsta-
cles, such as large rocks or fallen trees.
When you go over obstacles, always fol-
low proper procedures as described in
the Owner’s Manual.

U4KB1C.book  Page 36  Wednesday, October 23, 2002  2:54 PM

Summary of Contents for WOLVERINE YFM350FXP








































































































































































Reviews:

No comments