manualshive.com logo in svg

Yamaha WOLVERINE YFM350FXP, Owner'S Manual, Page: 125 / 167

Share
Download
Yamaha WOLVERINE YFM350FXP Owner'S Manual Download Page 125

8-20

EBU00301

Idle speed adjustment

NOTE:

A diagnostic tachometer must be used for this
procedure.

1. Start the engine and warm it up for a few

minutes at approximately 1,000 to
2,000 r/min. Occasionally rev the engine
to 4,000 to 5,000 r/min. The engine is
warm when it quickly responds to the
throttle.

2. Connect the tachometer and set the idle

to the specified idling speed by adjusting
the throttle stop screw. Turn the screw in
to increase engine speed, and out to de-
crease engine speed.

1. Throttle stop screw

EBU00303

Valve clearance adjustment

The correct valve clearance changes with
use, resulting in improper fuel/air supply or
engine noise. To prevent this, the valve clear-
ance must be adjusted regularly. This adjust-
ment however, should be left to a professional
Yamaha service technician.

Specified idle speed:

1,450 ~ 1,550 r/min

U4KB1C.book  Page 20  Wednesday, October 23, 2002  2:54 PM

Summary of Contents for WOLVERINE YFM350FXP








































































































































































Reviews:

No comments