Yamaha WaveRunner FX SHO, Service Manual

Page: 74 / 433

2-15
E
SPEC
Multifunction meter bolt M5 4 0.4 3.0 8-22
Side cover bolt M6 5 0.5 3.7 8-24
Side ornament nut — 5 0.5 3.7 8-24
Center cover nut — 5 0.5 3.7 8-25
Shift lever assembly nut — 5 0.5 3.7 8-25
Box cap — 2 0.2 1.5 8-25
Lid lock hook/bracket bolt M5 4 0.4 3.0 8-27
Steering arm assembly bolt M8 16 1.6 11.8 8-29
Steering cable ball joint nut — 7 0.7 5.2 8-29
Cable stopper assembly bolt M6 7 0.7 5.2 8-29
Steering master assembly nut — 21 2.1 15.5 8-29
Compass sensor nut (FX Cruiser SHO) — 4 0.4 3.0 8-29
Bracket 1 and 2 bolt M5 4 0.4 3.0 8-31
Steering sensor bolt M6 7 0.7 5.2 8-31
Steering master housing bolt M6 7 0.7 5.2 8-31
Steering cable grommet nut — 5.9 0.59 4.4 8-36
Steering cable locknut (steering master
end and jet pump end)
— 7 0.7 5.2 3-3, 8-36
Speed sensor lead grommet nut — 5.9 0.59 4.4 8-36
Shift cable holder nut — 7 0.7 5.2 8-36
Shift cable bracket nut — 16 1.6 11.8 8-36
Shift cable grommet nut — 5.9 0.59 4.4 8-36
Shift cable locknut (jet pump end) — 2.9 0.29 2.1 8-36
Cooling water pilot outlet nut — 4 0.4 3.0 8-41
Seat lock assembly bolt M6 6 0.6 4.4 8-43
Deck beam nut — 18 1.8 13.3 8-43
Projection nut — 26 2.6 19.2 8-43
Rear seat stay nut — 6 0.6 4.4 8-43
Seat holder nut — 16 1.6 11.8 8-43
Hand grip nut — 5 0.5 3.7 8-43
Rubber hose/resonator clamp — 3.7 0.37 2.7 8-46
Rubber hose/water tank clamp — 3.7 0.37 2.7 8-46
Water tank/rubber hose clamp — 3.7 0.37 2.7 8-46
Plate/rubber hose/exhaust valve nut — 5 0.5 3.7 8-46
Battery box bolt M6 5.4 0.54 3.9 8-46
Bow eye bolt M6 13 1.3 9.6 8-50
Front protector 1 nut —
5 0.5 3.7 8-50
Front protector 1 bolt M6
Front protector 2 nut — 5 0.5 3.7 8-50
Pull-up cleat assembly bolt M6 2 0.2 1.5 8-50
Sponson bolt M8 16 1.6 11.8 8-50
Ski tow nut — 16 1.6 11.8 8-52
Spout nut — 5 0.5 3.7 8-52
Stern eye nut — 16 1.6 11.8 8-52
Part to tightened
Thread
size
Tightening torque
Refer to
page
N · m kgf · m ft · lb
Tightening torques