Periodic maintenance and adjustment
55
4.
Start the engine and add coolant until the
coolant level stabilizes, and then stop the
engine.
5.
Fill the coolant reservoir with coolant un-
til it reaches the “FULL” mark.
6.
Install the coolant reservoir cap.
7.
Check for any coolant leakage.
TIP
If you find any leaks, consult a Yamaha deal-
er.
8.
Close the shroud.
ESU15050
V-belt
WARNING
EWS00403
Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.
Make sure that the drive guard is in-
stalled securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
NOTICE
ECS00831
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
The V-belt should be checked before each
ride.
To check the V-belt
1.
Open the shroud, and then remove the
drive guard. (See page 21 for drive guard
removal procedures.)
2.
Check the V-belt for wear and damage.
Replace if necessary.
1. “FULL” mark
2. Coolant reservoir cap
Recommended antifreeze:
High-quality ethylene glycol anti-
freeze containing corrosion inhibitors
Antifreeze and water mixing ratio:
3:2
Total amount:
4.70 L (4.97 US qt, 4.14 Imp.qt)
1
2
1. V-belt wear limit
U8KWS1E0.book Page 55 Tuesday, May 17, 2016 1:49 PM
