Periodic maintenance and adjustment
46
3.
Remove the screws and bolts, and then
remove the right side cover.
To install the right side cover
1.
Place the right side cover in the original
position, and then install the bolts and
screws.
2.
Place the side bumper in the original po-
sition, and then install the bolts.
3.
Close the shroud.
NOTICE
ECS01041
Make sure that all cables, leads, and
hoses are routed properly before clos-
ing the shroud and installing the right
side cover.
When installing the right side cover, be
sure to tighten the bolts and screws se-
curely.
ESU11785
Checking the spark plugs
The spark plugs are important engine com-
ponents and are easy to inspect. The condi-
tion of the spark plugs can indicate the
condition of the engine.
Check the coloration on the white porcelain
insulator around the center electrode. The
ideal coloration at this point is a medium-to-
light tan color for a snowmobile that is being
ridden normally. If any spark plug shows a
distinctly different color, there could be
something wrong with the engine. For exam-
ple, a very white center electrode porcelain
color could indicate an intake track air leak or
carburetion problem for that cylinder. Do not
attempt to diagnose such problems yourself.
Instead, take the snowmobile to a Yamaha
dealer for inspection and possible repairs.
You should periodically remove and inspect
the spark plugs because heat and deposits
will cause any spark plug to slowly break
down and erode. Consult a Yamaha dealer
before changing to a different type of spark
plug.
WARNING
EWS00711
Be sure to use the specified spark plug
and spark plug cap. Otherwise, the
T.O.R.S. may not work properly.
Spark plugs are produced in several different
thread lengths. The thread length or reach is
the distance from the spark plug gasket seat
1. Bolt
2. Side bumper
1. Right side cover
2. Screw
3. Bolt
2
1
1
2
3
2
Specified spark plug:
Manufacturer:
NGK
Model:
CR8E
U8KWS1E0.book Page 46 Tuesday, May 17, 2016 1:49 PM
