Control functions
18
If a problem is detected in any of those cir-
cuits, the warning light and the engine trouble
warning indicator flash, and an error code
displays in the meter display. Note the error
code, and then have a Yamaha dealer in-
spect the snowmobile as soon as possible.
NOTICE:
Do not continue to operate the
engine longer than necessary if there is an
error code to avoid possible engine dam-
age.
[ECS00821]
ESU10532
Engine stop switch “ ”
The engine stop switch is used to stop the
engine in an emergency. Simply push the
stop switch to stop the engine. To start the
engine, pull the stop switch and proceed with
starting the engine. (See page 32 for engine
starting procedures.)
During the first few rides, practice using the
stop switch so that you can react quickly in
an emergency.
ESU10662
Headlight beam switch
“LIGHTS”
Push the headlight beam switch to change
the headlight to high beam “HI” or to low
beam “LO”.
ESU12655
Grip/thumb warmer adjusting
switch
The grip warmer adjusting switch and the
thumb warmer adjusting switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
1. Warning light “
”
2. Engine trouble warning indicator “
”
3. Error code display
1. Engine stop switch “
”
1 2
3
1. Headlight beam switch “LIGHTS”
2. High beam “HI”
3. Low beam “LO”
1. Grip warmer adjusting switch
1
U8KWS1E0.book Page 18 Tuesday, May 17, 2016 1:49 PM
