manualshive.com logo in svg

Yamaha VK PROFESSIONAL-II 2016, Owner'S Manual

The Yamaha VK PROFESSIONAL-II 2016 comes with a comprehensive Owner's Manual that provides all the necessary information for users. Easily download the manual for free from our website and unlock the full potential of this exceptional product. Discover detailed instructions, troubleshooting tips, and much more to enhance your experience with the Yamaha VK PROFESSIONAL-II 2016.

Share
Download
background image

Control functions

22

2.

Lift up the rear of the drive guard as
shown, and then pull the guard rearward
to remove it.

To install the drive guard

1.

Fit the front slots in the drive guard over
the projections on the drive guard front
holder.

2.

Align the slots in the rear of the drive
guard with the projections on the drive
guard rear holder, and then insert the
drive guard locking pin into the holder as
shown.

ESU10762

V-belt holders

Keep a spare V-belt for emergency use by
placing it into the V-belt holders provided.

NOTICE

ECS00181

Make sure that the V-belt is installed se-
curely in the holders.

ESU10682

Passenger grip warmer switch

The passenger grip warmer switch controls
the electrically heated passenger grips.

1. Drive guard
2. Drive guard locking pin

1. Drive guard

1

2

1

1. Drive guard
2. Drive guard locking pin

1. V-belt holder

1

2

1

U8KWS1E0.book  Page 22  Tuesday, May 17, 2016  1:49 PM

Summary of Contents for VK PROFESSIONAL-II 2016































































































Reviews:

No comments

Related manuals for VK PROFESSIONAL-II 2016

BOMBARDIER Ski-doo MX ZX 440 Operator'S Manual preview
Ski-doo MX ZX 440
Brand: BOMBARDIER Pages: 18

Brands by name

Popular brands

Load more brands