Control functions
28
Rear torsion springs
WARNING
EWS00751
The left and right spring preloads must be
adjusted to the same setting. Uneven set-
tings can cause poor handling and loss of
stability.
To increase the spring preload and thereby
harden the suspension, turn the adjuster in
direction (a). To decrease the spring preload
and thereby soften the suspension, turn the
adjuster in direction (b).
ESU13095
Adjusting the 2-up adjusting blocks
(For EUROPE)
WARNING
EWS00761
Make sure that the 2-up adjusting blocks
are installed in the same position on both
sides of the snowmobile, otherwise poor
handling and loss of stability may result.
The spring force can be adjusted by chang-
ing the position of the 2-up adjusting blocks.
1. Spring preload adjusting ring
Spring preload setting:
Minimum (soft):
1
Standard:
1 (For EUROPE)
3 (For RUSSIA)
Maximum (hard):
5
1
(b)
(a)
1. Spring preload adjuster
Spring preload setting:
Minimum (soft):
S
Standard:
S
Maximum (hard):
H
1. 2-up adjusting block
1
(b)
(a)
U8KWS1E0.book Page 28 Tuesday, May 17, 2016 1:49 PM
