Yamaha VITY XC125E Owner'S Manual Download

Page: 21 / 76

INSTRUMENT AND CONTROL FUNCTIONS

3-6

EAU12950

Rear brake lever

The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the handle-
bar grip.

EAU45390

Fuel tank cap

To remove the fuel tank cap

1. Open the seat. (See page 3-8.)
2. Open the fuel tank cap lid.
3. Turn the fuel tank cap counter-

clockwise and pull it off.

To install the fuel tank cap

1. Insert the fuel tank cap into the

tank opening and turn it clockwise
until the “

” marks on the cap

and tank are aligned.

2. Close the fuel tank cap lid.
3. Close the seat.

WARNING

EWA11090

Make sure that the fuel tank cap is
properly closed before riding.

1. Rear brake lever

1. Fuel tank cap lid

2. Fuel tank cap

U4P7E1E0.book Page 6 Wednesday, December 12, 2007 9:37 AM

Summary of Contents for VITY XC125E













































































Search results

Summary of Contents for VITY XC125E

Reviews:

Related manuals for VITY XC125E

Brands by name

Popular brands

Yamaha VITY XC125E, Owner'S Manual

Search results

Summary of Contents for VITY XC125E

Reviews:

Related manuals for VITY XC125E

Brands by name

Popular brands