Yamaha VITY XC125E Owner'S Manual Download Page 48

Page: 48 / 76

PERIODIC MAINTENANCE AND MINOR REPAIR

6-13

3. Pull the air filter element out.

4. Insert a new air filter element into

the air filter case.

CAUTION:

ECA10480

●

Make sure that the air filter ele-
ment is properly seated in the
air filter case.

●

The engine should never be op-
erated without the air filter ele-
ment installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.

5. Install the air filter case cover by in-

stalling the screws.

Cleaning the air filter check hoses

1. Check the hoses on the rear side

of the air filter case for accumulat-
ed dirt or water.

2. If dirt or water is visible in the air fil-

ter check hoses, remove the
clamps from them, and then re-
move the plugs to drain the hoses.

Cleaning the V-belt case air filter el-
ement

1. Place the scooter on the center-

stand.

2. Remove the screws, and then pull

the V-belt case air filter element
cover outward and away from V-
belt case.

1. Air filter case cover
2. Screw

1. Air filter element

1. Air filter check hose
2. Clamp

3. Air filter check hose plug

1
2

1. V-belt case air filter element cover
2. Screw

U4P7E1E0.book Page 13 Wednesday, December 12, 2007 9:37 AM

Summary of Contents for VITY XC125E













































































Search results

Summary of Contents for VITY XC125E

Reviews:

Related manuals for VITY XC125E

Brands by name

Popular brands

Yamaha VITY XC125E, Owner'S Manual

Search results

Summary of Contents for VITY XC125E

Reviews:

Related manuals for VITY XC125E

Brands by name

Popular brands