Yamaha VITY XC125E Owner'S Manual Download Page 49

Page: 49 / 76

PERIODIC MAINTENANCE AND MINOR REPAIR

6-14

3. Remove the V-belt case air filter

element holder by removing the
screw.

4. Pull the V-belt case air filter ele-

ment out, and then clean it with
solvent. After cleaning, remove the
remaining solvent by squeezing
the element.

WARNING

EWA10430

Use only a dedicated parts cleaning
solvent. To avoid the risk of fire or
explosion, do not use gasoline or
solvents with a low flash point.

CAUTION:

ECA10520

To avoid damaging the air filter ele-
ment, handle it gently and carefully,
and do not twist it.

5. Apply oil of the recommended type

to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.

NOTE:

The air filter element should be wet but
not dripping.

6. Insert the element into the V-belt

case.

7. Install the air filter element holder

by installing the screw.

8. Install the air filter element cover

by installing the screws.

1. V-belt case air filter element holder
2. Screw

1. V-belt case air filter element

Recommended oil:

Yamaha foam air filter oil or other
quality foam air filter oil

U4P7E1E0.book Page 14 Wednesday, December 12, 2007 9:37 AM

Summary of Contents for VITY XC125E













































































Search results

Summary of Contents for VITY XC125E

Reviews:

Related manuals for VITY XC125E

Brands by name

Popular brands

Yamaha VITY XC125E, Owner'S Manual

Search results

Summary of Contents for VITY XC125E

Reviews:

Related manuals for VITY XC125E

Brands by name

Popular brands