Yamaha Tyros4, Service Manual

Page: 84 / 173

Tyros4
84
Test 33
Function: Slider check
Description:
Slide the 9 sliders one by one in the order of Max (255) to
Min (0) and check that the operation is detected.
When checking a slider, current value will be shown.
Checking is executed in the order of [ASSIGN]
"
[S1]
"
[S2]
"
...
"
[S8], and the result of each slider should be OK to
proceed to the next checking.
Displayed Message:
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
Selected screen
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
［ＡＳＳＩＧＮ］ Ｕｐ （−−−）
When the checking is started.
(Starts with the [ASSIGN]. Indicates current value in parentheses ( ).)
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
［ＡＳＳＩＧＮ］ Ｄｏｗｎ（２５５）
During checking
(After the maximum value is detected, the indication will change to "Down" .)
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
［ＡＳＳＩＧＮ］ ＯＫ
During checking
(After the minimum value is detected, the indication will change to
"OK"
.)
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
［ Ｓ１ ］ Ｕｐ （ ５）
The indication changes to the next slider and the checking will be executed.
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
［ Ｓ８ ］ ＯＫ
When the checking proceeds to the slider 8 and the result is
"OK"
,
０３３：Ｓｌｉｄｅｒ Ｃｈｅｃｋ
ＯＫ
the indication will change to
"OK"
.
Supplement:
It is not until the device is moved after the checking is started
when a value is loaded.
A current value will be indicated for a device until the result
is judged as OK.
When the result of all the devices are OK, only
"OK" will be
shown on the screen.