Yamaha TT-R230Y Owner'S Manual Download Page 3 | Manualshive

Page: 3 / 74

background image

INTRODUCTION

EAU10081

Congratulations on your purchase of the Yamaha TT-R230Y. This model is the result of Yamaha’s vast experience in the
production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and
reliability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable at
the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of the
motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the
recommended maintenance schedules and operating instructions contained within this manual.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most
current product information available at the time of printing, there may be minor discrepancies between your motorcycle and
this manual. If there is any question concerning this manual, please consult a Yamaha dealer.

EWA10011

Please read this manual and the “YOU AND YOUR MOTORCYCLE: RIDING TIPS” booklet carefully before operating
this motorcycle. Do not attempt to operate this motorcycle until you have attained adequate knowledge of its controls
and operating features. Regular inspections and careful maintenance, along with good operating techniques, will
help ensure that you safely enjoy the capabilities and reliability of this motorcycle.

introduction.pmd

2008-06-04, 07:56

2

«
1
2
3
4
5
...
»

Summary of Contents for TT-R230Y











































































Reviews:

No comments

Related manuals for TT-R230Y

Brand: Caberg Pages: 16

Brand: Yamaha Pages: 94

Brand: Yamaha Pages: 287

Brand: N-Com Pages: 6

Brand: BMW Pages: 176

Brand: Ohlins Pages: 4

Brand: LAZER Pages: 11

Brand: Suzuki Pages: 42

6513515 00 22-00-40

Brand: hepco & becker Pages: 7

Brand: Rivco Pages: 5

Brand: Toolland Pages: 25

Brand: Husqvarna Pages: 7

Brand: Tool it Pages: 26

Brand: KTM Pages: 20

Brand: Wunderkind Custom Pages: 8

Brand: Rockford Fosgate Pages: 8

Brand: Deco Pages: 40

Prime R1-HD2-9813

Brand: Rockford Fosgate Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands