8 - 2
MOTORCYCLE CARE AND STORAGE
8
After normal use
Remove dirt with warm water, a mild
detergent, and a soft, clean sponge, and
then rinse thoroughly with clean water.
Use a toothbrush or bottlebrush for hard-
to-reach areas. Stubborn dirt and insects
will come off more easily if the area is
covered with a wet cloth for a few min-
utes before cleaning.
After riding in the rain or near the sea
Since sea salt is extremely corrosive,
carry out the following steps after each
ride in the rain or near the sea.
1. Clean the motorcycle with cold
water and a mild detergent, after
the engine has cooled down.
NOTICE: Do not use warm water
since it increases the corrosive
action of the salt.
[ECA10791]
2. Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.
After cleaning
1. Dry the motorcycle with a cham-
ois or an absorbing cloth.
2. Immediately dry the drive chain
and lubricate it to prevent it from
rusting.
3. Use a chrome polish to shine
chrome, aluminum and stainless-
steel parts, including the exhaust
system.
4. To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray on all metal, includ-
ing chrome- and nickel-plated, sur-
faces.
5. Use spray oil as a universal cleaner
to remove any remaining dirt.
6. Touch up minor paint damage
caused by stones, etc.
7. Wax all painted surfaces.
8. Let the motorcycle dry completely
before storing or covering it.
EWA11131
Contaminants on the brakes or tires
can cause loss of control.
z
z
z
z
z
Make sure that there is no oil or
wax on the brakes or tires.
z
z
z
z
z
If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher
speeds, test the motorcycle’s
braking performance and cor-
nering behavior.
ECA10800
NOTICE
z
z
z
z
z
Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.
z
z
z
z
z
Never apply oil or wax to any
rubber and plastic parts, but treat
them with a suitable care prod-
uct.
z
z
z
z
z
Avoid using abrasive polishing
compounds as they will wear
away the paint.
TIP
Consult a Yamaha dealer for advice on
what products to use.
Cap_8-15.pmd
2008-06-04, 08:01
2
Summary of Contents for TT-R230Y
Page 9: ...LOCATION OF IMPORTANT LABELS 1 1 2 Cap_1 15 pmd 29 1 2009 10 21 2 ...
Page 27: ...FORYOUR SAFETY PRE OPERATION CHECKS 5 5 2 Cap_5 15 pmd 2008 06 04 07 59 2 ...
Page 34: ...7 4 PERIODIC MAINTENANCE AND ADJUSTMENT 7 Cap_7 15 pmd 3 2 2009 09 27 4 ...
Page 69: ...CONSUMER INFORMATION 10 10 5 Cap_10 15 pmd 29 1 2009 12 18 5 ...
