5-2
POWR
E
FLYWHEEL MAGNET ASSEMBLY
REMOVING THE FLYWHEEL MAGNET
ASSEMBLY
5
Remove:
• Flywheel magnet assembly
Removing steps
(1) Remove the flywheel magnet assem-
bly nut.
Å
For USA and Canada
ı
Except for USA and Canada
NOTE:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel magnet
assembly holder may easily slip off of the
flywheel magnet assembly.
(2) Remove the flywheel magnet assem-
bly
Å
For USA and Canada
ı
Except for USA and Canada
NOTE:
• The major load should be applied in the
direction of the arrows.
• Apply the load until the flywheel magnet
assembly comes off the tapered portion of
the crankshaft.
CAUTION:
To prevent damage to the engine or tools,
screw in the universal puller set-bolts
evenly and completely so that the puller
plate is parallel to the flywheel magnet
assembly.
Flywheel magnet assembly
holder
YB-06139 / 90890-06522
Universal puller
YB-06117 / 90890-06521
Å
5020
ı
5030
Å
ı
5040
5050
