6-65
E
LOWR
BACKLASH (REGULAR ROTATION MODELS)
BACKLASH
(REGULAR ROTATION MODELS)
6
NOTE:
• Do not install the water pump compo-
nents when measuring the backlash.
• Measure both the forward and reverse
gear backlashes.
• If both the forward and reverse gear back-
lashes are larger than specification, the
pinion may be too high.
• If both the forward and reverse gear back-
lashes are smaller than specification, the
pinion may be too low.
MEASURING THE FORWARD GEAR
BACKLASH
1. Measure:
• Forward gear backlash
Out of specification
→
Adjust.
Forward gear backlash
(150J, 200J/SX150, SX200
models)
0.25 - 0.46 mm
(0.010 - 0.018 in)
(150L/VX150 model)
0.71 - 1.01 mm
(0.028 - 0.040 in)
Measuring steps
(1) Set the shift rod into the neutral posi-
tion.
Shift rod wrench
YB-06052 / 90890-06052
6645
