54
Basics Section
Effects in Voice Mode
In the Voice mode, you can set the Effect Send
parameter for the Reverb and Chorus sections, and
store them with each Voice.
For the Variation Effect, the Effect Type and the
various effect parameters can be set, as well as the
effect on/off setting for each Voice. The signals that
are processed by the Variation block are mixed and sent
to the Reverb and Chorus sections.
n
Drum Voices in Voice mode have no Variation effect.
Effects in Multi Mode
You can set the desired Effect type for each Effect
section as well as its parameter values for each Multi in
the Multi mode. By using Variation as an Insertion
effect, you can apply the effect to only one of the Parts
(see illustration below).
As shown in the illustration below, the Reverb section
and Chorus section function as System effects, which
process all of the Parts, according to each Part’s effect
send setting and the global effect return setting — just
like on an actual mixer. When using Variation as an
Insertion effect, the signal connection is serial, and the
effect is applied only to the selected Part — just like
patching in an outboard effect on a single instrument
channel.
Voice
* Depending on the selected effect type, the Dry/Wet parameter
may not be available. For details, refer to the Effect
Parameter List in the separate Data List booklet.
Multi
* Depending on the selected effect type, the Dry/Wet parameter
may not be available. For details, refer to the Effect
Parameter List in the separate Data List booklet.
* The default value of Dry Level is 127. This cannot be set
from the panel of the S03; however, it can be set by
transmitting appropriate MIDI messages from an external
device.
Voice
Output
System Effects
Variation
Effect
Chorus
Chorus
Part 1~16
Mixer
Variation Effect
Can be used as either System or
Insertion effect.
1
2
3
4
5
6
16
Insertion Effect
Reverb Effect
System Effects
Chorus Effect
Dry/Wet
Reverb (Rev)
(Fixed setting: Hall 1)
(Fixed setting: Chorus 1)
Chorus (Cho)
Chorus
Send
Total Lvl
Reverb Send
Out
SndCho
→
Rev
Variation (Var)
VOICE
Total Vol
Dry/Wet
SndCho
→
Rev
Part 1
Part 2
Part 3
Part 16
Rev Return
Cho Return
Chorus Send
Reverb Send
Var Connect=INS
Part 3 Var Send set to on
Out
Variation (Var)
Reverb (Rev)
Chorus (Cho)
Total Vol
Part 1
Part 2
Part 16
Rev
Return
Cho
Return
Var
Return
Dry Level
Var Send
Var Connect set to SYS
Out
SndVar
→
Rev
SndCho
→
Rev
Sndvar
→
Cho
Chorus
Send
Reverb
Send
Variation (Var)
Reverb (Rev)
Chorus (Cho)
Total Vol
Summary of Contents for S03 voice editor
Page 1: ...OWNER S MANUAL ...
Page 109: ...MEMO ...