Yamaha S03 voice editor, Owner'S Manual

Page: 85 / 112

85
V
oice Mode
Drum Common General
(PAGES 1 to 2)
For Drum Voices, there are two Common General
parameters, shown below.
1. Name
The parameters and settings are the same as for
Normal Voices. Details are given on Page 71.
2. OrgKt (Original Kit)
This selects the Original Kit (the Wave set in which a
different sound is assigned to each key).
n
The sound-to-key assignments for the Kit are fixed and
cannot be changed.
❏
Settings: See the separate Data List.
Drum Key Oscillator/Mix
(PAGES 1 to 5)
Drum Key Pitch (PAGE 6)
Drum Key Filter (PAGE 7)
Drum Key Amplitude (PAGE 8)
Drum Key Effect (PAGES 9 to 10)
The following is an explanation of the Key Parameters
used to edit each Drum Key. Each key can have its own
independent settings. Select the desired Drum Key by
pressing the appropriate key on the keyboard.
1. Level
This can be used to adjust the output of each Drum
Key. Select the desired Drum Key by pressing the
appropriate key on the keyboard.
❏
Settings: 0 ~ 127
2. Pan
Set the Pan position for each sound in a Drum Voice
(Drum Kit).
❏
Settings: Rnd (random; the pan position moves randomly
each time a key is played), L63 (Left) ~ C (Center)
~ R63 (Right)
n
The numeric keypad can also be used to enter the value,
as shown below.
0: Rnd
1 ~ 63: L63 ~ L01
64: C (Center)
65 ~ 127: R01 ~ R63
3. Alt.Group (Alternate Group)
Determines the Alternate Group to which the Wave is
assigned. In a real drum kit, some drum sounds cannot
physically be played simultaneously, such as open and
closed hi-hats. You can prevent different sounds from
playing back simultaneously by assigning them to the
same Alternate Group. Up to 127 Alternate Groups
can be defined. You can also select “off” here if you
wish to allow the simultaneous playback of sounds.
❏
Settings: off, 1 ~ 127
n
To specify the “off” value, press the [0] button on the
numeric keypad, then press the [ENTER] button.
4. Key Assign
Set Key Assign to “sngl” (single) to prevent the
doubled playback of the same received notes. Select
“multi” to consecutively assign each instance of the
same received note to a separate channel.
❏
Settings: sngl, multi
StandKit
KEY ELEM PART
OCTAVE
PAGE
OrgKt
2
Level
KEY ELEM PART
OCTAVE
PAGE
115
4
Pan
KEY ELEM PART
OCTAVE
PAGE
L37
2 4
Alt.Group
KEY ELEM PART
OCTAVE
PAGE
off
3 4
Key Assign
KEY ELEM PART
OCTAVE
PAGE
sngl
4 4
Drum Common General/Drum Key Oscillator/Mix