Yamaha RX10K, Assembly Manual

Page: 87 / 98

6-24
1 Clamp the grip warmer lead
and the right handlebar switch
lead.
Clamp the main harness, main
switch and harness.
Throttle cable
Handlebar holder
Pass all leads and cables
through the cable holder. (Ex-
cept for brake hose and parking
brake cable.)
Pass the brake hose and the
parking brake cable through
the cable holder.
Clamp the fuel sender lead and
speed sensor lead.
Clamp the tail / brake light lead,
headlight beam switch lead
and grip warmer lead.
Parking brake cable
Left handlebar switch
Speed sensor lead coupler
Fuel sender lead cover
Route the fuel tank breather
hose along the frame cross
member.
Clamp the speed sensor lead
only.
Clamp the fuel tank breather
hose.
Clamp the compression spring
section of the fuel tank breather
hose.
Compression spring
Breather tank
Point the clip position to the up-
ward.
Insert the fuel tank breather
hose until it contacts the projec-
tion.
Pass the fuel hose over the en-
gine oil breather hose.
Pass the carburetor air vent
hose outside of the engine oil
breather hose.
To the speed sensor.
Carburetor air vent hose
To the parking brake.
To the brake caliper
Brake hose
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27