Yamaha RX10K, Assembly Manual

Page: 65 / 98

To the headlight and meter as-
sembly
Clamp the lead at the position
of white tape.
Clamp the wire harness and
A.C.magneto lead.
Battery negative lead
Battery positive lead
Main harness
Negative lead connector
Carburetor heater lead coupler
Oil level switch lead coupler
Oil level switch
Starter motor positive lead (un-
der the battery bracket)
Carburetor switch lead connec-
tor
Clamp the coated section of the
lead.
Coolant temperature sensor
lead coupler
To the brake caliper
There should be no slack of
leads.
Clamp the vacuum hose 2.
Clamp the ignition coil lead.
Connectors
To the heat exchanger
Main switch
Set the coupler in the rear
space of the instrument panel
Tail / brake light lead coupler
Throttle cable
Right handlebar switch lead
coupler
Thumb warmer switch lead
coupler
Grip warmer switch lead con-
nector
To the tail / brake light
Headlight beam switch lead
coupler
Left handlebar switch lead cou-
pler
Brake light switch lead coupler
Route the starter cable above
the left handlebar switch lead.
Brake hose
Fuel sender lead coupler
Clamp the ignition coil lead un-
der the fuel hose.
Clamp the fuel hose. 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
23
24
25
26
27
28
29
30
31
32
16
22
33
34
35
36
6-2