Yamaha RX10K, Assembly Manual

Page: 83 / 98

6-20
Route the coolant hose be-
tween the upper vacuum hose
and lower vacuum hose.
Route the vacuum hose under
the coolant hose.
Route the vacuum hose over
the coolant hose.
Clamp the coolant hose and
vacuum hose.
Clamp the coolant hose and
vacuum hose 2.
Point the pawl of clip to the up-
ward.
Clamp the throttle position
switch lead.
Throttle position sensor lead
coupler. (under the vacuum
hose)
Drive guard bracket
Connect the battery negative
lead to the starter motor mount-
ing bolt.
Clamp the throttle position
switch lead and carburetor
switch lead.
Voltage regulator
Carburetor heater relay
Headlight relay
Main relay
Back buzzer (RX10RK, RX10
RSK, RXW10K, RXW10SK)
Fuel pump (RX10MK, RX10
MSK)
To the carburetor (RX10MK,
RX10MSK)
Flange nut
Hexagon bolt
Two pole coupler for A.C.mag-
neto.
Between two pole coupler for
A.C.magneto lead and the
clamp is set to 20 mm (0.79 in)
or less.
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
53
55
56
57
58