Yamaha RX10K, Assembly Manual

Page: 38 / 98

3-13
A B
3
4
3
4
CAUTION:
3. Adjust:
S
Track deflection
Adjustment steps:
D
Lift the rear of the machine onto a suitable
stand to raise the track off the ground.
D
Loosen the rear axle nut 1 .
a. Start the engine and rotate the track one or
two turns. Stop the engine.
b. Check the track alignment with the slide
runner
2 .
If the alignment is incorrect, turn the left and
right adjusters to adjust.
Track alignment
Shifted
to right
Shifted
to left
Left adjuster nut Turn out Turn in
Right adjuster nut Turn in Turn out
5 Slide runner 6 Track
7 Track metal
a Gap C Forward
c. Adjust track deflection to the specified
amount.
Track deflection
More than
Specified
Less than
Specified
Left adjuster nut Turn in Turn out
Right adjuster nut Turn in Turn out
The adjusters should be turned an equal
amount.
D
Recheck alignment and deflection. If nec-
essary, repeat steps “a” to “c” until proper
adjustment is achieved.
D
Tighten the rear axle nut.
Rear axle nut:
75 Nm (7.5 m
S
kg, 54 ft
S
lb)