Yamaha RX-S600, Owner'S Manual

Page: 80 / 123

CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
80
Sound
DSP Parameter
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 85
Panorama Enables/disables the broadening effect of the front sound field. 85
Center Width Adjusts the broadening effect of the center sound field. 86
Dimension Adjusts the difference in level between the front and surround sound fields. 86
Center Image Adjusts the center orientation level (broadening effect) of the front sound field. 86
Lipsync
Select Selects the method to adjust the delay between video and audio output. 86
Adjustment Adjusts the delay between video and audio output manually. 86
Volume
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 87
Main Zone Max Volume Sets the main zone maximum volume to prevent excessive loudness. 87
Main Zone Initial Volume Sets the main zone initial volume for when this receiver is turned on. 87
Zone2 Max Volume Sets the Zone2 maximum volume to prevent excessive loudness. 87
Zone2 Initial Volume Sets the Zone2 initial volume for when the Zone2 is turned on. 87
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 88
ECO Mode Enables/disables the eco mode (power saving mode). 88
Function
Input Rename Changes the input source name displayed on the front display. 88
Dimmer Adjusts the brightness of the front display. 89
Memory Guard Prevents accidental changes to the settings. 89
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 89
Party Mode Set Enables/disables switching to the party mode. 89
Network
Information Displays the network information on the unit. 90
IP Address Configures the network parameters (such as IP address). 90
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 91
DMC Control Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback. 91
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 91
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 91
Network Update Updates the firmware via the network. 92
Language Select an on-screen menu language. 92
Menu Item Function Page
RX-S600_S600D_om.book Page 80 Tuesday, May 28, 2013 1:36 PM