Yamaha RX-S600 Owner'S Manual Download Page 75

Page: 75 / 123

PLAYBACK

➤

Configuring playback settings for different playback sources (Option menu)

■

Tone Control (Tone Control)

Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.

Choices

Treble (Treble), Bass (Bass)

Setting range

-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments

Default

Bypass (Bypass)

• If you set an extreme value, sounds may not match those from other channels.

■

DSP/Surround (DSP/Surround)

Configures the sound field program and surround settings.

❑

DSP Level (DSP Level)

Adjusts the sound field effect level.

Setting range

-6 dB to +3 dB (1 dB increments)

Default

0 dB

❑

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.

Settings

If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.

❑

Enhancer (Enhancer)

Enables/disables Compressed Music Enhancer (p.43).

• This setting is applied separately to each input source.

• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer

(p.43).

Settings

Default

TUNER, USB, (network sources) : On (On)

Others: Off (Off)

Traffic Program (TrafficProgram)

(RX-S600 U.K. and Europe models only)
Automatically searches for a traffic information
station.

Init Scan (Init Scan)

(RX-S600D only)
Performs an initial scan for DAB radio reception.

Tune Aid (Tune Aid)

(RX-S600D only)
Checks reception strength of each DAB channel
label.

Repeat (Repeat)

Configures the repeat setting for the iPod (p.59),
USB storage device (p.62), or media server (p.65).

—

Shuffle (Shuffle)

Configures the shuffle setting for the iPod (p.59),
USB storage device (p.62), or media server (p.65).

—

Volume Interlock (Interlock)

Enables/disables volume controls from iTunes/iPod
via AirPlay.

Item

Function

Page

On (On)

Automatically adjusts the dynamic range.

Off (Off) (default)

The dynamic range is not automatically adjusted.

Off (Off)

Disables Compressed Music Enhancer.

On (On)

Enables Compressed Music Enhancer.

Volume: low

Volume: high

Input level

Off

Out

put

level

Out

put

level

RX-S600_S600D_om.book Page 75 Tuesday, May 28, 2013 1:36 PM

Summary of Contents for RX-S600




























































































































Search results

Summary of Contents for RX-S600

Reviews:

Related manuals for RX-S600

Brands by name

Popular brands

Yamaha RX-S600, Owner'S Manual

Search results

Summary of Contents for RX-S600

Reviews:

Related manuals for RX-S600

Brands by name

Popular brands