Yamaha RX-S600 Owner'S Manual Download Page 101

Page: 101 / 123

APPENDIX

➤

Troubleshooting

101

The unit cannot be controlled using the remote
control.

The unit is out of the operating range.

Use the remote control within the operating range (p.5).

The batteries are weak.

Replace with new batteries.

The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.

Adjust the lighting angle, or reposition the unit.

The remote control is set to control external devices.

Press RECEIVER to set the remote control to control the unit (the key lights up in
orange).

The remote control IDs of the unit and the remote control are not
identical.

Change the remote control ID of the unit or the remote control (p.93).

The remote control is set to operate the other zone.

Set the remote control to operate the desired zone (p.71).

External devices cannot be controlled using the
remote control.

The remote control is set to control the unit.

Press SOURCE to set the remote control to control external devices (the key lights
up in green).

The corresponding remote control code is not set properly.

Set the remote control code again (p.95). Even if the remote control code is
registered properly, some products may not respond to the remote control.

The MHL-compatible mobile device cannot be
controlled using the remote control.

A remote control code for another playback device is assigned to
HDMI 5.

Reset the remote control code registered to HDMI 5 (p.97).

The mobile device or its application is not externally controllable.

Directly operate the mobile device itself.

Problem

Cause

Remedy

RX-S600_S600D_om.book Page 101 Tuesday, May 28, 2013 1:36 PM

Summary of Contents for RX-S600




























































































































Search results

Summary of Contents for RX-S600

Reviews:

Related manuals for RX-S600

Brands by name

Popular brands

Yamaha RX-S600, Owner'S Manual

Search results

Summary of Contents for RX-S600

Reviews:

Related manuals for RX-S600

Brands by name

Popular brands