9 - 38
–
+
ELEC
SIGNALING SYSTEM
EBS01079
3. The reverse indicator light fails to come on.
YES
NO
YES
NO
YES
NO
1. Reverse switch
• Check the reverse switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the reverse switch OK?
Replace the reverse
switch.
2. Wiring
• Check the wiring circuit from the reverse
switch to ECU (green/white) and ECU to
meter assembly (yellow/blue).
• Is the wiring circuit properly connect and
without defects?
Properly connect or
repair the wiring cir-
cuit.
3. Voltage
• Connect the pocket tester (DC 20 V) to the
meter assembly coupler as shown.
Positive tester probe
→
brown/yellow
1
Negative tester probe
→
black/white
2
• Set the main switch to “ON”.
• Measure the voltage (12 V) of brown/yel-
low
1
and black/white
2
at the meter
assembly coupler.
• Is the voltage within specification?
Replace the meter
assembly or ECU.
The wiring circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired.
Y
/
L Br
/
Y B
/
W
Y
/
L Br
/
Y B
/
W
O
/
B
R
/
W
O
/
B
R
/
W
2
1