33
PX10/PX8/PX5/PX3
4. Service
inspection
4-1. How to connect
Refer to the “1-2. How to connect” (Page 32) of
Inspection section.
4-2. How to activate
Refer to the “2-1. Service inspection mode” (Page 32) of
Inspection section.
If powered on with service inspection mode successfully,
during Power On sequence, all LEDs light up simultaneously
for a few seconds.
4-3. The display for inspection
The PX device LCD. Category selection screen.
4-4. How to inspect
Left end
✽
is a selecting cursor.
The automatic paging is supported.
Controls
Inspection category
Inspection item
After Execution
[MENU] key
display category item
display category item
Switch
[A] key
select before category
select before item
display result before page
[B] key
select next category
select next item
display result next page
Main knob
fi
x category (display item)
execute item
select next item
Encoder
Main knob Left
select before category
select before item
display result before page
Main knob Right
select next category
select next item
display result next page
