PSR-I500 O
w
ner’s Man
u
al
71
Re
fe
re
n
c
e
USB Flash Drive Operations
By connectin
g
a USB flash drive (sold separately) to the [USB TO DEVICE] terminal, you
can save the data created on this instrument, such as User Son
g
and parameter set-
tin
g
s. The saved data can be recalled to this instrument a
g
ain for future use.
• You should use an AC adaptor when executing USB flash drive operations, since battery power may not be reliable enough to
last through these crucial operations. When you try executing certain functions, the “UseAdpt” indication may appear and the
selected function cannot be executed.
IMPORTANT
Precautions when usin
g
the [USB TO
DEVICE] terminal
This instr
u
ment feat
u
res a
bu
ilt-in [USB TO DEVICE] ter-
minal.
W
hen connecting a USB de
v
ice to the terminal,
b
e s
u
re to handle the USB de
v
ice
w
ith care. Follo
w
the
important preca
u
tions
b
elo
w
.
Compatible USB devices
• USB flash drive
Other USB de
v
ices s
u
ch as a USB h
ub
, comp
u
ter key-
b
oard or mo
u
se cannot
b
e
u
sed.
The instr
u
ment does not necessarily s
u
pport all com-
mercially a
v
aila
b
le USB de
v
ices. Yamaha cannot g
u
ar-
antee operation of USB de
v
ices that yo
u
p
u
rchase.
Before p
u
rchasing a USB de
v
ice for
u
se
w
ith this instr
u
-
ment, please
v
isit the follo
w
ing
w
e
b
page:
https://do
w
nload.yamaha.com/
Altho
u
gh USB de
v
ices 1.1 to 3.0 can
b
e
u
sed on this
instr
u
ment, the amo
u
nt of time for sa
v
ing to or loading
from the USB de
v
ice may differ depending on the type of
data or the stat
u
s of the instr
u
ment.
Connectin
g
a USB device
W
hen connecting a USB de
v
ice to the [USB TO
DEVICE] terminal, make s
u
re that the connector on the
de
v
ice is appropriate and that it is connected in the
proper direction.
Usin
g
a USB Flash Drive
By connecting the instr
u
ment to a USB flash dri
v
e, yo
u
can sa
v
e data yo
u
’
v
e created to the connected de
v
ice,
as
w
ell as read data from the connected de
v
ice.
Number of USB flash drives that can be
used
Only one USB flash dri
v
e can
b
e connected to the [USB
TO DEVICE] terminal.
Formattin
g
a USB flash drive
Yo
u
sho
u
ld format the USB flash dri
v
e only
w
ith this
instr
u
ment (page 73). A USB flash dri
v
e formatted on
another de
v
ice may not operate properly.
To protect your data (write-protect)
To pre
v
ent important data from
b
eing inad
v
ertently
erased, apply the
w
rite-protect pro
v
ided
w
ith each USB
flash dri
v
e. If yo
u
are sa
v
ing data to the USB flash dri
v
e,
make s
u
re to disa
b
le
w
rite-protect.
Turnin
g
off the instrument
W
hen t
u
rning off the instr
u
ment, make s
u
re that the
instr
u
ment is NOT accessing the USB flash dri
v
e
b
y
play
b
ack/recording or file management (s
u
ch as d
u
ring
Sa
v
e, Copy, Delete and Format operations). Fail
u
re to do
so may corr
u
pt the USB flash dri
v
e and the data.
• For more information about the handling of USB devices,
refer to the owner’s manual of the USB device.
• The rating of the [USB TO DEVICE] terminal is a maxi-
mum of 5V/500mA. Do not connect USB devices hav-
ing a rating above this, since this can cause damage
to the instrument itself.
NOTE
NOTICE
• Avoid connecting or disconnecting the USB device
during playback/recording and file management oper-
ations (such as Save, Delete and Format), or when
accessing the USB device. Failure to observe this may
result in “freezing” of the operation of the instrument
or corruption of the USB device and the data.
• When connecting then disconnecting the USB device
(and vice versa), make sure to wait a few seconds
between the two operations.
• Do not use an extension cable when connecting a
USB device.
• The format operation overwrites any previously exist-
ing data. Make sure that the USB flash drive you are
formatting does not contain important data. Proceed
with caution, especially when connecting multiple
USB flash drive.
NOTICE
NOTICE
Summary of Contents for PSR-I500
Page 86: ......
