PM5D / PM5D-RH Quick Start Guide Part 1
21
The matrix.
The PM5D matrix has 8 outputs and is fed by the 24 MIX buses and the two STEREO master buses. You can pair
matrixes just like mixes.
To send a mix to the matrix;
Press and hold or double click the MATRIX
[SEL] key. The MIX [SEL] lights will fl ash and
the encoders will show the levels or pans sent to
the chosen matrix. Alternatively press and hold or
double click the [SEL] key of a mix or master to see
the amount sent to the eight matrixes.
“THE EXAMPLES” use the matrix for their spare in-ear monitor system;
If there is a failure of a band member’s IEM system then their mix can be sent to the spare;
1) Turn on MATRIX 1 and 2 and pair them by press and holding both [SEL] keys.
2) Turn up encoder 2 to 3 o’clock to give unity output.
The set up is now ready.
When the spare is required;
1) Double click the MATRIX 2 [SEL] key
2) Turn on and up the mix that needs to go to the spare.
3) Double click the MATRIX 1 [SEL] key and check that L and R are panned for stereo; or do this as part of the set up
for all mixes.
Now is a another good time to store;
See page 11 for how to store now!
You can write over the
previously saved scene or
choose a new location if
you think you might ever
need to go back!
