manualshive.com logo in svg

Yamaha O2R, Owner'S Manual

Share
Download
Yamaha O2R Owner'S Manual Download Page 220

110

Internal Effects

02R User’s Guide

Exiting the Library

Selecting the LIB icon and pressing the [ENTER] button switches back to 
the EFFECT 2/3 page.

Icons

•

STORE

 —This icon is used to store the current program to the library. 

Select the icon with the CURSOR buttons. Use the encoder wheel to 
select a program and press the [ENTER] button. The 02R displays a 
confirmation dialog box asking if you want to store your settings in the 
selected program. The dialog box has two icons: “CANCEL” and 
“EXECUTE”.

CANCEL is the default. To cancel the STORE operation, either press 
the [ENTER] button or wait about 10 seconds—the STORE operation 
will be automatically cancelled.

To store your settings, use the CURSOR buttons to select the 
“EXECUTE” icon and press the [ENTER] button. The program is 
stored.

When you confirm a STORE operation, any existing data in the 
selected program location will be overwritten.

YOU SHOULD ALWAYS BE CAREFUL WHEN THE 02R DISPLAYS 
A CONFIRMATION DIALOG BOX!

•

RECALL

—This icon is used to recall a program from the library. Select 

the icon with the CURSOR buttons. Use the encoder wheel to select a 
program and press the [ENTER] button. The recalled program is now 
the current program.

•

CLEAR

—This icon is used to clear the contents of an effects program. 

Use the CURSOR buttons to select the icon. Use the encoder wheel to 
select an effects program and press the [ENTER] button. The 02R 
displays a confirmation asking if you want to clear the effects program. 
The dialog box has two icons: “CANCEL” and “EXECUTE”.

CANCEL is the default. To cancel the CLEAR operation, either press 
the [ENTER] button or wait about 10 seconds—the CLEAR operation 
will be automatically cancelled.

To clear the effects program, use the CURSOR buttons to select the 
“EXECUTE” icon and press the [ENTER] button. The program is 
cleared.

If you change your mind, the cleared effects program can be retrieved 
by recalling the Undo effects program (U).

Note:

You can customize your 02R to prevent the confirmation dialog box 

appearing during the STORE operation. See “Preferences” on page 198 of 
the User’s Guide for more information.

Note:

You can customize your 02R to prevent the confirmation dialog box 

appearing during the CLEAR operation. See “Preferences” on page 198 of 
the User’s Guide for more information.

Summary of Contents for O2R































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands