manualshive.com logo in svg

Yamaha O2R, Owner'S Manual, Page: 131 / 414

Share
Download
Yamaha O2R Owner'S Manual Download Page 131

User Interface

21

02R User’s Guide

CURSOR Buttons

The CURSOR buttons are used to select parameters and options on the 
display. The selected parameter or option usually appears highlighted.

The CURSOR buttons are also used to position the cursor in a name when 
naming automix mixes, scene memories, EQ programs, effects programs, 
dynamics programs, and channel library programs.

When a display left or right icon appears at the left or right side of a page, 
indicating that another display page is available, the CURSOR buttons are 
used to select that display.

Encoder Wheel

The encoder wheel is used to adjust the parameter selected using the 
CURSOR buttons. Its detented action gives it a positive feel, allowing quick 
and accurate parameter adjustments. Turning it clockwise increases the 
selected parameter value. Turning it counterclockwise decreases the 
selected parameter value. The faster you turn it, the faster the parameter 
value changes.

The encoder wheel is also used to scroll through the automix programs, 
mix scenes, effects programs, EQ programs, and dynamics processor 
programs. When naming automixes, mix scenes, user effects programs, 
user EQ programs, and user dynamics programs, the encoder wheel is 
used to scroll through the available characters.

ENTER Button

The [ENTER] button is used to confirm settings made using the encoder 
wheel and to toggle two-option parameters such as EQ ON/OFF.

SCENE MEMORY Buttons

These buttons allow you to select, store and recall scene memories. The 
current scene memory is indicated on the SCENE MEMORY LED.

CURSOR

ENTER

STORE

RECALL

SCENE MEMORY

Summary of Contents for O2R































































































































































































































































































































































































































Reviews:

No comments