manualshive.com logo in svg

Yamaha O2R, Owner'S Manual, Page: 152 / 414

Share
Download
Yamaha O2R Owner'S Manual Download Page 152

42

MIXING Display Functions

02R User’s Guide

The third METER page contains the meters for the bus outs, aux sends, and 
the stereo output, plus the master faders for the bus outs and aux sends, 
and appears when one of these channels is selected.

Peak Hold

The Peak Hold function can be turned on and off from any page of the 
METER display function. Clear the peak hold levels by turning the Peak 
Hold off (select the PEAK HOLD icon and press the [ENTER] button) or by 
selecting another display function. The dedicated control room output 
meter peak hold is not affected when other display functions are selected.

Meter Source Points

The following table lists the meter signal source points:

Note:

When the 02R reaches CLIP, digital signal distortion occurs. You must 

ensure this does not happen. Digital distortion is very unpleasant sounding. There 
are a several things you can do. If CLIP is reached, but the corresponding PEAK 
indicator is not illuminated, you need to attenuate the channel slightly with the 

∅

/ATT display function (see “Phase and Attenuation” on page 32 of the User’s 

Guide). Otherwise, back off the GAIN control a little (see “GAIN Controls” on 
page 27 of the User’s Guide).

Signal

Source Points

MIC/LINE 1–24

Post GAIN and 
A/D, Pre EQ

Post EQ

Post Fader

TAPE 1–16, EFF1, EFF2

Pre EQ

Post EQ

Post Fader

BUS 1–8, AUX 1–8, STE-
REO OUT

Pre Fader

Post Fader

Setting the Bus Out and 
Aux Send Levels

1.

Use the CURSOR buttons 
to select one of the 
fader icons.

2.

Adjust the level by 
rotating the encoder 
wheel.

Summary of Contents for O2R































































































































































































































































































































































































































Reviews:

No comments