manualshive.com logo in svg

Yamaha O2R, Owner'S Manual

Share
Download
Yamaha O2R Owner'S Manual Download Page 308

198

Digital I/O, Setup, and Utilities

02R User’s Guide

Preferences

The 02R is a very flexible mixer. You can customize its behavior to suit your 
needs using the preferences, which are divided into two pages: SETUP 3/4 
and SETUP 4/4.

Shown below is the SETUP 3/4 page—Preferences 1.

Preferences 1 Options

•

Auto EQ Display

—With this option checked, when you operate the 

buttons or controls in the SELECTED CHANNEL—EQUALIZER 
group, the EQ page appears automatically.

•

Auto PAN Display

—With this option checked, when you operate the 

buttons or controls in the SELECTED CHANNEL—PAN group, the 
PAN page appears automatically.

•

Auto ROUTING Display

—With this option checked, when you 

operate the buttons in the SELECTED CHANNEL—ROUTING group, 
the ROUTING 1/4 page appears automatically.

•

Auto AUTOMIX Display

—With this option checked, the AUTOMIX 

1/7 page appears automatically when automix recording is stopped.

•

Auto SOLO Display

—With this option checked, the SETUP 1/4 page 

appears automatically when you press the [SOLO] button.

•

Auto WORD CLOCK Display

—With this option checked, the 

DIGITAL I/O 1/5 page appears automatically if a DIGITAL I/O error 
occurs.

•

Store Confirmation

—With this option checked, the 02R will request 

you confirm any scene memory or library store or clear operations. The 
initial setting is checked.

You should leave this option in its default state when your 02R is going 
to be operated by an inexperienced person. Forcing them to respond to 
a confirmation message may prevent the accidental loss of your 
valuable data.

1.

Use the [SETUP] button to 
locate the SETUP 3/4 or 
SETUP 4/4 page. 

2.

Use the CURSOR buttons 
to select a preference.

3.

Enable or disable the 
preference by pressing 
the [ENTER] button.

SETUP

Summary of Contents for O2R































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands