manualshive.com logo in svg

Yamaha O2R, Owner'S Manual, Page: 156 / 414

Share
Download
Yamaha O2R Owner'S Manual Download Page 156

46

MIXING Display Functions

02R User’s Guide

Groups and Channel ON

Use the CURSOR buttons to select the fader and mute group icons. Each 
time you press the [ENTER] button, the selected group will alternately be 
set or cancelled. Remember that a channel can only belong to one fader 
group and one mute group. See “Grouping Faders” on page 182 and 
“Grouping Mutes” on page 183 of the User’s Guide.

Press the [ON] button to turn the channel on or off. See “ON Buttons” on 
page 28 of the User’s Guide.

Beside the fader and mute group icons is the fader position icon. You 
cannot adjust this from the display, but it accurately reflects the current 
position of the channel fader. Displayed below the icon is the fader position 
in dB. See “Faders” on page 28 of the User’s Guide.

Auxiliary Sends

Select an auxiliary channel with the CURSOR buttons. Each time you press 
the [ENTER] button, the setting alternates between pre and post-fader. To 
adjust the signal or to turn the send on or off, you need to use the AUX 
controls in the SELECTED CHANNEL group. The SEND LEVEL control 
adjusts the signal level and the [ON] button turns the send on or off. See 
“The AUX Buttons” on page 99 as well as “AUX 7 and AUX 8” on page 106 
of the User’s Guide.

EQ

When the cursor is on the ON icon, pressing the [ENTER] button will turn 
the EQ on or off. When the EQ is on, the icon text is “ON” and is 
highlighted.

Use the CURSOR buttons to select the EQ curve icon and press the 
[ENTER] button. The 02R will switch to the EQ display function. See “EQ” 
on page 51 of the User’s Guide. To return to the VIEW display function, 
press the [VIEW] button again.

You may find using the EQUALIZER controls in the SELECTED 
CHANNEL group a more convenient way to set the equalization. See “EQ 
controls” on page 53 of the User’s Guide.

Dynamics

When the cursor is on the OFF icon, pressing the [ENTER] button will turn 
the dynamics processor on or off. When the dynamics processor is off, the 
icon text is “OFF” and is displayed in normal video.

Use the CURSOR buttons to select the dynamics curve and press the 
[ENTER] button. The 02R will switch to the DYNAMICS display function. 
See “DYNAMICS Display Function” on page 83 of the User’s Guide. To 
return to the VIEW display function, press the [VIEW] button again.

Summary of Contents for O2R































































































































































































































































































































































































































Reviews:

No comments