Yamaha N MAX GPD150-A 2015, Service Manual

Page: 29 / 450

FEATURES
1-20
The instantaneous fuel consumption display can
be set to either “km/L” or “L/100 km”.
• “km/L”: The distance that can be traveled on
1.0 L of fuel under the current riding conditions
is shown.
• “L/100 km”: The amount of fuel necessary to
travel 100 km under the current riding condi-
tions is shown.
To switch between the instantaneous fuel con-
sumption display settings, push the “SELECT”
button for one second.
TIP
If traveling at speeds under 10 km/h (6 mi/h), “_
_._” is displayed.
Average fuel consumption mode
This display shows the average fuel consump-
tion since it was last reset.
The average fuel consumption display can be
set to either “km/L” or “L/100 km”.
• “km/L”: The average distance that can be trav-
eled on 1.0 L of fuel is shown.
• “L/100 km”: The average amount of fuel neces-
sary to travel 100 km is shown.
To switch between the average fuel consump-
tion display settings, push the “SELECT” button
for one second.
To reset the average fuel consumption, push the
“RESET” button for at least one second.
TIP
After resetting the average fuel consumption, “_
_._” will be shown until the vehicle has traveled
0.1 km (0.06 mi).
Oil change tripmeter mode
The oil change tripmeter shows the distance
traveled since it was last reset (i.e., since the last
oil change).
The oil change indicator “OIL” will flash at the ini-
tial 1000 km (600 mi), then at
4 000 km ( 25 00 mi)
and every 4 000 km thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset the oil
change tripmeter and the oil change indicator.
To reset them both, select the oil change tripme-
ter, and then push the “RESET” button for one
second. Then, while “OIL” and the oil change
tripmeter are flashing, push the “RESET” button
for three seconds. The oil change indicator will
be reset.
If the engine oil is changed before the oil change
indicator comes on (i.e., before the periodic oil
change interval has been reached), the oil
change tripmeter must be reset for the next peri-
odic oil change to be indicated at the correct
time.
V-belt replacement tripmeter mode
The V-belt replacement tripmeter shows the dis-
tance traveled since it was last reset (i.e., since
the last V-belt replacement).
1. Average fuel consumption display
1
1. Oil change indicator “OIL”
2. Oil change tripmeter
1. V-belt replacement indicator “V-BELT”
2. V-belt replacement tripmeter
2 1
2 1