Yamaha MusicCast R-N2000ASL, User Manual

Page: 44 / 150

6
Press the ENTER key to start YPAO making the automatic adjustments of speaker
settings.
Adjustments start automatically after about 10 seconds. It takes about one minute.
ENTER
VOLUME
/
MUTE
AMP
PHONO LINE 1 LINE 2
TV CD USB DAC
OPT 1 OPT 2 COAX
TUNER BLUETOOTH NET
DISPLAY
SETUP
NOW PLAYING RETURN
OPTION
MEMORY PRESET
1 2
ENTER
3
SLEEP SP A/B
SETUP
NOW PLAYING RETURN
OPTION
ENTER
SETUP
NOW PLAYING RETURN
OPTION
NOTE
To cancel the operation before starting the YPAO function, unplug the YPAO microphone. After YPAO has started, press the
RETURN key.
7
Check the results on the front display.
After all adjustments are complete, the results are shown on the front display. Follow the
instructions and press the ENTER key to complete the adjustments.
8
Unplug the YPAO microphone from the YPAO MIC jack.
This completes the automatic adjustments of speaker settings via YPAO.
NOTICE
(
The YPAO microphone is sensitive to heat, so avoid hot places (such as on top of an external device) or places in direct sunlight
when storing it.
NOTE
(
Running YPAO automatically enables the YPAO Volume function, which is linked to the volume and automatically adjusts the bass/
treble balance. This allows you to enjoy a natural balance in sound quality, even at low volumes.
(
Run the YPAO process for each set of speakers that will be used. Speaker settings are saved individually for each of the speakers
used (A, B, A+B and Off).
(
Error messages may be displayed during auto-adjustment, and/or warning messages may appear in the results.
(
You can use the dedicated app “MusicCast Controller” to check the results of YPAO measurements and change the speaker
settings.
44
PREPARATION > Automatic adjustment of speaker settings (YPAO)