Yamaha MusicCast R-N2000ASL User Manual Download Page 21

Page: 21 / 150

SP A/B key

For switching the output speakers. Each time it is pressed, it switches in the order A, B, A+B, Off (p.50).

SLEEP key

Sets the sleep timer (p.92).

AMP key

Switches the power of this product between ON and Standby (p.39).

Input source selection keys

Selects the input source to play (p.51).

NOTE

Pressing the NET key repeatedly switches between the network sources.

DISPLAY key

Switches the display between different kinds of information (p.15).

MEMORY key

For registering radio stations (presets) (p.67). It can also be used for registering songs on media servers or Internet
radio stations (p.88).

PRESET key

Used for recalling registered (preset) radio stations (p.63 ) and registered songs/Internet radio stations (p.90).

1/2/3 keys

For registering and recalling your favorite radio stations or network content to separate presets (p.88).

SETUP key

Opens the Setup menu (p.94).

OPTION key

Opens the Option menu (p.76).

Menu operation keys

qwer

(cursor keys), ENTER, and RETURN

For operating the menus.

NOW PLAYING key

Shows info about the currently playing network content.

/- keys

Adjusts the volume (p.52).

MUTE key

Mutes the sound. Pressing it again returns the volume to its previous level.

■ (Stop),

(Play/Pause) keys

For operating playback, such as a media server, Internet radio, or Bluetooth.

NAMES OF PARTS AND THEIR FUNCTIONS > Remote control

Summary of Contents for MusicCast R-N2000ASL























































































































































Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands

Yamaha MusicCast R-N2000ASL, User Manual

Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands