Yamaha MusicCast R-N2000ASL User Manual Download Page 107

Page: 107 / 150

Advanced Setup menu (changing system settings)

Basic operation of the Advanced Setup menu

For changing system settings for the product. Operate as follows from the front panel.

If this product is turned ON, push the

(Power) Switch down to turn it OFF.

While pressing RETURN, lift the

(Power) Switch up.

The following screen is shown on the front display.

Turn SELECT to select a setting item.

Press SELECT to set the setting item.

To go back a level of the menu, press the RETURN key.

Turn SELECT to select the setting value.

Press SELECT to set the setting value.

Push the

(Power) Switch down to turn it OFF.

Lift the

(Power) Switch again to turn it back ON.

The changes to settings are reflected.

Summary of Contents for MusicCast R-N2000ASL























































































































































Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands

Yamaha MusicCast R-N2000ASL, User Manual

Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands