Yamaha MusicCast R-N2000ASL User Manual Download Page 14

Page: 14 / 150

Front Display

Displays various information and menus (p.15).

SELECT (PUSH-ENTER)

Used for things like operating the menus on the front display. Turn this to select an item, and press it to confirm the
selection.

PURE DIRECT/Indicator

Switches the Pure Direct function ON/OFF (p.54). When this is ON, the indicator lights up, and the front display turns
off.

RETURN/CONNECT

Used for things like operating the menus on the front display.

Also used when registering this product on the MusicCast Network (p.41).

PRESET

Used for recalling registered (preset) radio stations (p.63 ) and registered songs/Internet radio stations (p.90).

Wireless LAN indicator

Lights up when this product is connected to a wireless network (p.132).

Bluetooth indicator

Lights up when a Bluetooth device is connected (p.69).

Summary of Contents for MusicCast R-N2000ASL























































































































































Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands

Yamaha MusicCast R-N2000ASL, User Manual

Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands