E-11
English
To check the programmed data
1
Press
STOP
&
or
PAUSE
*
to stop or pause
program playback.
2
Press
SKIP
$
or
›
to skip through the step
information (or use the jog dial on the front panel).
To add a step
1
Press
STOP
&
to stop program playback.
2
Press
PROG
to enter the program input mode.
3
Press
SKIP
›
repeatedly until “_” is displayed.
4
Use the number buttons to program a new track at
the end of the program.
To delete a specific step
1
Press
STOP
&
to stop program playback.
2
Press
PROG
to enter the program input mode.
3
Press
SKIP
$
or
›
to skip through the step
information (or use the jog dial on the front panel).
4
Press
DELETE
(or
DELETE/CANCEL
on the
front panel) to delete the step. The higher steps are
renumbered automatically.
To change a step
1
Press
STOP
&
to stop program playback.
2
Press
PROG
to enter the program input mode.
3
Press
SKIP
$
or
›
to skip through the step
information (or use the jog dial on the front panel).
4
Use the number buttons to program a new track
number for that step. The original track is cleared
from memory and the new track is programmed.
To cancel
Press
STOP
&
in the stop mode or the program input
mode to turn off the PROGRAM indicator. The program
is erased.
Notes
• If the total time exceeds 255 minutes, “255mOver” is
displayed instead of the total time.
•
SKIP
$
or
›
can be used during playback to skip
between programmed tracks.
•
SEARCH
⁄
can be used during playback to search
through all tracks in the current program.
•
SEARCH
!
can be used during playback to return to
the beginning of the current track.
Using Headphones for Private
Listening
Set the
PHONES LEVEL
knob on the front panel to
“0” (minimum) and insert the headphones plug of your
stereo headphones into the
PHONES
jack.
To adjust the volume level of the headphones
Use the
PHONES LEVEL
knob.
Turn toward “10” (maximum) to increase the volume.
Turn toward “0” (minimum) to decrease the volume.
