Front and rear panel
23
—Owner’s Manual
Rear panel
A
POWER switch
This switch is used to turn the MD4S on and off.
B
AC IN
Connect the included power cable here.
C
AUX SEND 1, 2 jacks
These are 1/4" phone jacks that output the signals from the input channels as adjusted by the
AUX controls (input channel
5
). Normally they are used as effect send jacks to send signals
to external effect processors (page 45).
D
MONITOR OUT jacks
These are RCA phono jacks that output the monitor signal selected by the MONITOR
SELECT switch (monitor/master
J
). Connect them to your hi-fi system or to amplified
monitor speakers.
E
STEREO OUT jacks
These are RCA phono jacks that output the signal of the ST bus that has passed through the
STEREO fader (monitor/master
L
). During mixdown, connect these jacks to the inputs of
your master recorder.
F
2TR IN jacks
These are RCA phono jacks for connecting a line-level stereo device. Normally they are
connected to the output jacks of your DAT or other master recorder.
G
TRACK DIRECT OUT 1–4 jacks
These are RCA phono jacks which individually output the signals from tracks 1–4 (the signals
currently being recorded/played). Normally they are used to connect the MD4S to the input
jacks of a large mixer when you wish to use an external mixer to mix the playback of the MD4S
recorder tracks.
R
R
R
4
2
L
L
L
2TR IN
AUX SEND
AC IN
3
1
MIDI
OUT
STEREO
OUT
MONITOR
OUT
POWER
ON/ OFF
TRACK
DIRECT OUT
THRU
IN
1
2
7
8
4 5 6
3
2
1
CAUTION
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
