INSP
ADJ
R-65
TYRE INSPECTION
2. Inspect :
• Tyre surfaces
Wear/damage Ÿ Replace
¿ Tread Depth
À Side wall
Á Wear indicator
•
Be sure to install the correct Tube when us-
ing Tube Type Tyres.
•
While installing Tyre on Wheel always check
that the Tyre lining is seated uniformly with
respect to wheel rim.
2. After a Tyre repair or replacement, be sure
to tighten the Valve Stem Locknut ¿ to
specification.
3-26
Basic weight :
With oil and full fuel tank
113 kg
Maximum load*
172 kg
Cold tyre pressure
Front
Rear
Up to 90 kg load*
24 psi
28psi
90 kg ~ maximum
load*
24psi
32psi
*Load is the total weight of the cargo, rider,
passenger and accessories.
WARNING
• It is dangerous to ride with a worn out tyre.
When the tyre tread begins to show signs
of wear, replace the tyre immediately.
• Patching a punctured tube is not recom-
mended. If it is absolutely neccessary to
do so, use great care and replace the tube
as soon as possible with a good quality re-
placement tube.
• Do not use tubeless tyres on a wheel de-
signed for tube type tyres only. Tyre failure
and personal injury may result from sud-
den deflation.
WARNING
After mounting a Tyre, ride conservatively for
a while to give the Tyre time to seat itself
properly in the Rim, Failure to do so could
lead to an accident with possible injury to
the rider or damage to the Motorcycle.
Minimum Tyre tread Depth :
(Front and rear)
1.6 mm
Locknut:
1.5 Nm (0.15 m.kg, 0.2 ft.lb)
